When your garage door opener stops working without warning, it’s normally easy to assess the cause of the issue and find a solution. However, there are times when you’ll need to contact a professional to make major repairs to the opener, or you may decide to get a new device that is compatible with your garage door. Here are a few of the common problems that you may experience with your garage door opener, as well as some suggestions for repairs. If you find that none of these solutions are helping, it’s best to take a look at the owner’s manual or call a technician to resolve the issue promptly.
If the wall switch or remote control doesn’t work with the garage door opener, there’s a good chance that power source for the opener has been interrupted. Check to ensure that the monitor unit hasn’t been unplugged and inspect the outlet where your garage door opener is plugged to see if the cord is completely plugged in.
There’s also a possibility that the fuse, circuit breaker or GFCI controlling the garage door opener has burned out or tripped. If you notice that other electrical circuits aren’t working correctly, it’s likely that you have a fuse or circuit breaker issue. In this case, it’s best to reset the GFCI or breaker and get a new fuse. If the GFCI or circuit breaker keeps tripping, this is an indication that there is a short circuit in your system or the garage door itself.
The motor for the garage door could possibly be out of order as well. If you find that the motor isn’t working at all or has burned out, it’s best to call a professional to replace the motor for you. If you discover that the garage door won’t work without the keypad or remote control, there are a few solutions you can try as well. For instance, moving closer to the door may work well, since you could possibly be out of range of the antenna which can stop the door from opening or closing. Modern garage door openers are basically tiny radios that operate at around 315mH. So, if you’re a few feet away from the preferred distance, this could affect the garage door opener signal. You should also ensure that the antenna on the motor unit is handing downward and hasn’t sustained any damage. If the door works well with the wall switch, this usually means the battery needs to be replaced in the keypad or remote control.
You may need to reprogram your keypad or remote control. These electronics are sensitive and can lose programming, which means you’ll have to reset them. Every garage door has a different reprogramming method, so make sure you read the instruction manual or search online for details on how to reprogram your particular garage door opener. If the reprogramming doesn’t work or the garage door won’t completely close, it’s best to contact a technician who can assess the issues and fix your garage door opener quickly.
